Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 281)

VIVOTEK
User's Manual - 281
© 2022 VIVOTEK INC. All Right Reserved
150
NAME VALUE SECURITY
(get/set) DESCRIPTION
(httpversion) is equal or greater than
0301b.
* It will be replaced by
capability_camctrl_ptztunnel.
camctrl_ptztunnel 0/7 Indicate whether to support
ptztunnel.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
* Only available when
capability_ptzenabled > 0
camctrl_privilege 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the
security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
* Only available when
capability_ptzenabled > 0
uart_httptunnel 0/7 Indicate whether to support HTTP
tunnel for UART transfer.
transmission_mod
e Tx,
Rx,
Both 0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver
box, Both = DVR.
network_wire 0/7 Indicate whether to support Ethernet.
network_wireless 0/7 Indicate whether to support wireless.
network_dualmod 0/7 Indicate whether network dual mode
© 2022 VIVOTEK INC. All Right Reserved
151
NAME VALUE SECURITY
(get/set) DESCRIPTION
e is supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0305a.
wireless_s802dot1
1b 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot1
1g 0/7 Indicate whether to support wireless
802.11g.
wireless_s802dot1
1n 0/7 Indicate whether to support wireless
802.11n.
wireless_begincha
nnel 1 ~ 14 0/7 Indicate the begin channel of wireless
network
wireless_endchann
el 1 ~ 14 0/7 Indicate the end channel of wireless
network
wireless_encrypt_
wep 0/7 Indicate whether to support wireless
WEP.
wireless_encrypt_
wpa 0/7 Indicate whether to support wireless
WPA.
wireless_encrypt_
wpa2 0/7 Indicate whether to support wireless
WPA2.
wireless_apmode_
enable 0/7 Indicate whether wireless AP mode is
supported.
* Only available when
"capability_network_wireless" is "1".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0305a.
wireless_apmode_
ssidprefix 0/7 Indicate the prefix of broadcasted
SSID when camera is in wireless AP
mode.
* Only available when
"capability_wireless_apmode_enable"
is "1".
* We support this parameter when