3 capability for ir led – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 293
VIVOTEK
User's Manual - 293
© 2022 VIVOTEK INC. All Right Reserved
162
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
maxfocus
0,
The upper limit for focus position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
7.27.3
Capability for IR Led
Group:
capability_daynight_c<0~(n-1)>
n denotes the value of "capability_nvideoin"
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
support
0/7
Indicate whether the camera supports
day/night mode switch
builtinir
0/7
Indicate whether to support built-in IR
led.
* We replaced this parameter with
“capability_daynight_illuminators_builti
n_support” when the version number
(httpversion) is equal or greater than
0312a.
builtinwled
0/7
Indicate whether to support built-in
white led.
* We replaced this parameter with
“capability_daynight_illuminators_builti
n_type=whiteled” when the version
number (httpversion) is equal or greater
than 0312a.
externalir
0/7
Indicate whether to support external IR
led.
* We replaced this parameter with
“capability_daynight_illuminators_exter
nal_support” when the version number
(httpversion) is equal or greater than
0312a.
© 2022 VIVOTEK INC. All Right Reserved
163
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
optimizedir
0/7
Indicate whether to support optimized
IR control technology.
* We replaced this parameter with
“capability_daynight_illumintators_opti
mizedir” when the version number
(httpversion) is equal or greater than
0312a.
smartir
0/7
Indicate whether to support smart IR.
ircutfilter
0/7
Indicate whether to support IR cut.
lightsensor
0/7
Indicate whether to support light
sensor.
blackwhitemode
0/7
Indicate whether to support
automatically switch to Black & White
display during the night mode.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.
ircutsensitivity_type
0/7
Indicate the cgi interface of
"ircutcontrol_sensitivity".
"options"
: the value of
"ircutcontrol_sensitivity" parameter is
"low, normal,high".
"normalize"
: the value of
"ircutcontrol_sensitivity" parameter is
"1~100"
"-"
:not support
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302a.