Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 177)

VIVOTEK
User's Manual - 177
© 2022 VIVOTEK INC. All Right Reserved
46
7.4 Digital Output Behavior Define
Group: do_i<0~(k-1)> for k is the value of "capability_ndo" (capability_ndo > 0)
k is determined by the below criterion:
The following applies for capability_extension_do_num >= 0
* if extension_connected=1, k=capability_ndo
* if extension_connected=0, k=capability_ndo+ capability_extension_do_num
Otherwise,
* k=capability_ndo
NAME VALUE SECURITY
(get/set) DESCRIPTION
normalstate open,
grounded 1/1 Indicate open circuit or closed circuit
(inactive status)
7.5 Security
Group: security
NAME VALUE SECURITY
(get/set) DESCRIPTION
privilege_do
view, operator,
admin 1/6 Indicate which privileges and above
can control digital output
(capability_ndo > 0)
privilege_camctrl
view, operator,
admin 1/6 Indicate which privileges and above
can control PTZ
(capability_ptzenabled > 0 or
capability_eptz > 0 or
capability_fisheye > 0)
user_i0_name string[64] 6/7 User name of root
user_i<1~20>_name string[64] 6/7 User name
user_i0_pass password[64] 7/6 Root password
user_i<1~20>_pass password[64] 7/6 User password
user_i0_privilege view,
operator,
admin 6/7 Root privilege
user_i<1~20>_ privilege
view,
operator,
admin 6/6 User privilege
© 2022 VIVOTEK INC. All Right Reserved
47
7.6 Network
Group: network
NAME VALUE SECURITY
(get/set) DESCRIPTION
preprocess 6/6 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP
Streaming service;
To stop service before changing its port
settings. It’s
recommended to set this
parameter when change a service port
to the port occupied by another service
currently. Otherwise, the service may
fail.
Stopped service will auto-start after
changing port settings.
Ex:
Change HTTP port from 80 to 5556, and
change RTP port for video from 5556 to
20480.
Then, set preprocess=9 to stop both
service first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_
port=5556&
network_rtp_videoport=20480”
type lan,
pppoe
6/6 Network connection type.
resetip 6/6 1 => Get ipaddress, subnet, router,
dns1, dns2 from DHCP server at next
reboot.