1 video input setting per channel – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 192
![background image](https://www.manualsdir.com/files/882627/content/doc192.png)
VIVOTEK
192 - User's Manual
© 2022 VIVOTEK INC. All Right Reserved
62
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
re_maxrange" != "-"
* Only valid when
"piris_mode"=manual or
"irismode"=fixed
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_rangetype" is "twovalues".
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
enablepreview
1/4
Usage for UI of exposure settings.
Preview settings of video profile.
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_mode" !=0
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
7.8.1
Video Input Setting per Channel
Group:
videoin_c<0~(n-1)>
for n channel products, and m is stream number
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME
VALUE
SECURITY(
get/set)
DESCRIPTION
cmosfreq
50, 60
4/4
CMOS frequency.
* Only available when "
capability_videoin_type " is 2
mode
0 ~
"capability_videoin_c<0~(
n-1)>_nmode"-1
4/4
Indicate the video mode on use.
whitebalance
auto,
4/4
Modes of white balance.