Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 431
VIVOTEK
User's Manual - 431
© 2022 VIVOTEK INC. All Right Reserved
300
Syntax:
http://
/cgi-bin/admin/connect_ap.cgi
PARAMETER
VALUE
DESCRIPTION
N/A
N/A
Apply the wireless settings and connect to AP.
8.31
Get Wireless Information
(capability_network_wireless >
0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
http://
/cgi-bin/admin/getwirelessinfo.cgi
PARAMETER
VALUE
DESCRIPTION
N/A
N/A
Get wireless information. Camera will return following
information.
1. Wireless channel
2. Link quality
3. Signal level
4. Noise level
5. SNR
6. TX Rate
7. RX Rate
8.32
Get Wireless Signal Strength
(capability_network_wireless
> 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
http://
/cgi-bin/admin/getwlsignalstrength.cgi
© 2022 VIVOTEK INC. All Right Reserved
301
PARAMETER
VALUE
DESCRIPTION
N/A
N/A
Get wireless signal strength.
8.33
WPS Transaction
(capability_network_wireless > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
http://
/cgi-bin/admin/start_wps.cgi
PARAMETER
VALUE
DESCRIPTION
N/A
N/A
Start WPS transaction.
8.34
Peripheral Control
(capability_peripheral_c<0~(n-1)>_
devicecontrol > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
(for control API)
http://
[&washer_mode=
[&washer_status=
[&washer_dwelltime=
[&heater_status=
Example:
http://myserver/cgi-bin/admin/peripheral.cgi?channel=0&operation=set&washer_mode=wiper&
washer_status=on
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
Pragma: no-cache\r\n
\r\n