33 storage management setting – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 361
VIVOTEK
User's Manual - 361
© 2022 VIVOTEK INC. All Right Reserved
230
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
stateorprovincen
ame
string[128]
6/6
State or province name in the
certificate information.
localityname
string[128]
6/6
The locality name in thecertificate
information.
organizationname string[64]
VIVOTEK Inc.
6/6
Organization name in the certificate
information.
unit
string[64]
VIVOTEK Inc.
6/6
Organizational unit name in
thecertificate information.
commonname
string[64]
www.vivotek.com
6/6
Common name in the certificate
information.
validdays
0 ~ 825
6/6
Valid period for the certification.
7.33
Storage Management Setting
Group:
disk_i<0~(n-1)>
n denotes the value of "capability_storage_management_ndevice"
(capability_storage_management_ndevice > 0)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
cyclic_enabled
6/6
Enable cyclic storage method.
cyclic_reserve
10 ~ 99
6/6
The reserved percentage of this disk.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
type
sd, nas
6/7
The storage device type.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
© 2022 VIVOTEK INC. All Right Reserved
231
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
autocleanup_mode
targetbase,
sourcebase
6/6
Specify the automatic clean up method
for storage devices, where “targetbase”
indicate the automatic clean up is based
on the attached devices such as nas or sd
card, whereas “sourcebase” indicate
automatic clean up is based on the
selected recording track.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
autocleanup_enabled
6/6
Enable automatic clean up method.
Expired and not locked media files will be
deleted.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
autocleanup_maxage
To specify the expired days for automatic
clean up.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.