Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual

Page 393

VIVOTEK

User's Manual - 393

262

PARAMETER

VALUE

SECURITY
(get/set)

DESCRIPTION

focusshift_night_lastdate ,

HH:MM:SS>

6/7

A recorded UTC time when IR offset value
is saved during night mode.

: IR offset value hasn't been

saved before.

263

Useful Functions

8.1

Drive the Digital Output

(capability_ndo > 0)

Note:

This request requires Viewer privileges.

Method:

GET/POST

Syntax:
http:///cgi-bin/dido/setdo.cgi?do0=<

value

> [&do1=]

[&do2=][&do3=]

Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state,
and trigger time is indicated in seconds.
PARAMETER

VALUE

DESCRIPTION

state[trigger time]

Where "state" is 0, 1.
“0” means inactive or
normal state while
“1” means active or
triggered state.
Where "trigger time"
is reset time after
state change.

Ex: do0=1

Setting digital output #1 to trigger state.
Ex: do0=0[30]

Setting digital output #1 to normal state, waiting 30
seconds, setting it to trigger state.

Example:

Drive the digital output #1 to triggered state, reset do0 after 20 seconds and redirect to

an empty page.

http://myserver/cgi-bin/dido/setdo.cgi?do0=1[20]

8.2

Query Status of the Digital Input

(capability_ndi > 0)

Note: This request requires Viewer privileges

Method:

GET/POST

Syntax:
http://<

servername

>/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]

If no parameter is specified, all of the digital input statuses will be returned.