34 region of interest, 35 eptz setting, Eptz settings for each stream – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 363
VIVOTEK
User's Manual - 363
© 2022 VIVOTEK INC. All Right Reserved
232
7.34
Region of Interest
Group:
roi_c<0~(n-1)>
for n channel product and m is the index of video stream which support ePTZ.
(capability_eptz > 0)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home
1/6
ROI left-top corner coordinate.
* If the minimal window size is 64x64,
then the "home"=(0~resolution_W-64,
0~resolution_H-64), which the resolution
is equal to the captured size by device in
this video mode.
* If the stream doesn’t support ePTZ, the
permissions of this parameter must be
set as 1/7.
s<0~(m-1)>_size
1/6
ROI width and height. The width value
must be multiples of 16 and the height
value must be multiples of 8
*If the minimal window size is 64x64,
then the "size"=(64~resolution_W,
64~resolution_H), which the resolution is
equal to the captured size by device in
this video mode.
* If the stream doesn’t support ePTZ, the
permissions of this parameter must be
set as 1/7.
7.35
ePTZ Setting
Group:
eptz_c<0~(n-1)>
for n channel product.
(capability_eptz > 0)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
© 2022 VIVOTEK INC. All Right Reserved
233
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
osdzoom
1/4
Indicates multiple of zoom in is
“on-screen display” or not.
* Reserved for compatibility, and suggest
don't use this since [httpversion] > 0302a
* We replace
"eptz_c<0~(n-1)>_osdzoom" with "
videoin_c<0~(n-1)>_zoomratiodisplay".
smooth
1/4
Enable the ePTZ "move smoothly"
feature
tiltspeed
-5 ~ 5
1/7
Tilt speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
panspeed
-5 ~ 5
1/7
Pan speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
zoomspeed
-5 ~ 5
1/7
Zoom speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
autospeed
1 ~ 5
1/7
Auto pan/patrol speed
(It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
7.35.1.
ePTZ Settings for Each Stream
Group:
eptz_c<0~(n-1)>_s<0~(m-1)>
for n channel product and m is the index of video stream.
(capability_eptz > 0)
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
patrolseq
string[120]
1/4
The patrol sequence of ePTZ. All the
patrol position indexes will be separated
by ","