Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 423)

VIVOTEK
User's Manual - 423
© 2022 VIVOTEK INC. All Right Reserved
292
8.25 3D Privacy Mask
(Capability_image_c<0~(n-1)>_privacymask_wintype =
3Drectangle)
n denotes the value of "capability_nvideoin"
Note: This request requires admin user privilege
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/admin/setpm3d.cgi?method=&maskname=&[maskhei
ght=&maskwidth=&videosize=&return=]
PARAMETER
VALUE DESCRIPTION
method add Add a 3D privacy mask at current location
delete Delete a 3D privacy mask
edit Edit a 3D privacy mask
maskname string[40] 3D privacy mask name
maskheight integer 3D privacy mask height
maskwidth integer 3D privacy mask width
videosize Optimal.
The size of plug-in (ActiveX) window in web page is the
size of the privacy window size. This field is not
necessary, it will use the default value if not specified.
320x180 for 16:9 resolution and 320x240 for 4:3
resolution.
return Redirect to the page after the parameter
is assigned. The should be the relative
path according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the is invalid path, it will ignore this
parameter.
© 2022 VIVOTEK INC. All Right Reserved
293
8.26 Camera Control
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
(for control API)
http://< servername >/cgi-bin/camctrl/camctrl.cgi?[channel=][&camid=]
[&move=] – Move home, up, down, left, right
[&focus=] – Focus operation
[&zoom=] – Zoom in, out
[&zooming=&zs=] – Zoom without stopping, used for joystick
[&vx=&vy=&vs=] – Shift without stopping, used for joystick
[&x=&y=&videosize=&resolution=&stretch=] – Click on
image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=][&speedtilt=][&speedzoom=][&speedapp=
< value > ][&speedl
ink=] ] – Set speeds
[&return=]
Example:
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&move=right
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&zoom=tele
http://myserver/cgi-bin/camctrl/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x
480&videosize=704x480&strech=1
Example: (set the ptz preset with focus mode)
* We support this function when the version number of the PTZ control module is equal or greater
than 5.0.0.20.
http://myserver/cgi-bin/camctrl/camctrl.cgi?name=xxx&focussetting=sync&cam=getsetpreset
PARAMETER
VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
camid 0, Camera ID.
move home Move to camera to home position.
up Move camera up.