Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 407)

VIVOTEK
User's Manual - 407
© 2022 VIVOTEK INC. All Right Reserved
276
network_rtsp_s2_accessname = live2s1.sdp
network_rtsp_s3_accessname = live2s2.sdp
etc.
* For version number(httpversion) above 0311c, the default RTSP access name format is
“lives.sdp”. Please refer to the “subgroup of network: rtsp” for setting the accessname of
SDP.
* You can get the SDP by HTTP GET.
* When using scalable multicast, Get SDP file which contains the multicast information via HTTP.
Note:
* We recommend to use new format to access streaming when
capability_media_streamprofiles_support=1, please refer to
Methods for Accessing Streaming
8.14 Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<
servername >/_accessname>
For RTSP (MP4), the user needs to input theURL below into an RTSP compatible player.
rtsp://<
servername >/_accessname>
“m” is the stream number.
For details on streaming protocol, please refer to the “control signaling” and “data format”
documents.
8.15 Send Data (capability_nuart > 0)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/viewer/senddata.cgi?
[com=][&data=][&flush=] [&wait=] [&read=]
PARAMETER
VALUE DESCRIPTION
com 1 ~ number> The target COM/RS485 port number.
© 2022 VIVOTEK INC. All Right Reserved
277
data data>[,data>] The is a series of digits from 0 ~ 9, A ~
F. Each comma separates the commands by 200
milliseconds.
flush yes,no yes: Receive data buffer of the COM port will be cleared
before read.
no: Do not clear the receive data buffer.
wait 1 ~ 65535 Wait time in milliseconds before read data.
read 1 ~ 128 The data length in bytes to read. The read data will be in
the return page.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: \r\n
\r\n
\r\n
Where hexadecimal data is digits from 0 ~ 9, A ~ F.
8.16 Storage Managements (capability_storage_dbenabled > 0)
Method: GET and POST
Note: This request requires administrator privileges.
In the past time, all the recorded files could be searched/updated/deleted independently. However,
this implementation provides no abstraction of recorded video clips, and which is not easy to use.
Thus edge storage API try to provide a higher abstraction of these video clips.
Ability to change database content from lsctrl.cgi was removed, lsctrl.cgi is changed to read-only.
P
LEASE REFER TO
E
DGE
S
TORAGE
API
Syntax:
http://<
servername >/cgi-bin/admin/lsctrl.cgi?cmd=[&=…]
The commands usage and their input arguments are as follows.
PARAMETER VALUE DESCRIPTION
cmd_type Required.
Command to be executed, including
search and
queryStatus .