Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 339
VIVOTEK
User's Manual - 339
© 2022 VIVOTEK INC. All Right Reserved
208
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
"Policy" can be categorized into
following groups:
- (disabled) : UI turns grey and users
can't select it.
- (unchanged) : UI keeps the status as
before and
user can't change it.
- (hidden) : UI is hidden.
- (fixed) : UI is fixed to one selection or
value.
- (ranged) : UI is fixed to multiple
selections or values.
- (enabled) : UI is checked.
- (notsupport) : the affected function
is not available.
"Affect API name" can be described in
hierarchy, such as
"exposurewin.mode.blc:disabled:"
which means blc exposure window is
disabled. API name can be one word
as well, such as
"exposurelevel:fixed:6" which means
exposurelevel is fixed to level 6.
"Description" can be a nonnegative
integer or string or NULL.
"-" means no feature is affected.
* When "defog" = 0, this value must
be "-"
aespeed
0,1
0/7
0: Non-support AE speed
1: Support AE speed
aespeedsupportlevel
0/7
The value indicate the support
strength level of aespeed.
* Only available when
"capability_image_c<0~(n-1)>_aespee
d" is 1.
aespeedsupportsensit 0,1
0/7
0: Non-support tuning the sensitivity
© 2022 VIVOTEK INC. All Right Reserved
209
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ivity
of AE converge speed.
1: Support tuning the sensitivity of AE
converge speed.
* Only available when
"capability_image_c<0~(n-1)>_aespee
d" is 1.
gammacurve
0,1
0/7
0: Non-support tuning Gamma curve
1: Support tuning Gamma curve
lowlightmode
-,0,1
0/7
-:
Internal parameter, must not open
to user.
0: Non-support low light mode
1: Support low light mode
focusassist
0,1
0/7
0: Non-support focus assist
1: Support focus assist
remotefocus
0,
0/7
An 4-bit integer, which indicates the
supportive application of remotefocus
in this channel.
If the value of this parameter is larger
than 0, it means that the camera
supports remotefocus function in this
channel.
bit 0 => Indicate whether to support
both zoom and focus function.
bit 1 => Only support zoom function.
bit 2 => Only support focus
function.
bit 3 => Currently, this is a reserved
bit, and the default value is 0.
focuswindomain
qvga, px, std, -
0/7
The domain to set a focus window.
"qvga"
: a 320x240 range to represent
the whole image.
"px"
: Locate a window in the image
with pixels.
"std"
: A normalized 0~9999 range.
"-"
: Not supported.
focuswindow_nwindo 0, 0/7 Number of focus window