Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 287)

VIVOTEK
User's Manual - 287
© 2022 VIVOTEK INC. All Right Reserved
156
NAME VALUE SECURITY
(get/set) DESCRIPTION
layout_redirection 0/7 Indicate which function will be
redirected to the vadp package path.
"-": Not supported.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0309a.
securecam_suppor
t 0/7 Indicate support for security camera.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314a.
securecam_version 0/7 Indicate the security camera feature
phases.
* Only available when
capability_securecam_support=1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314a.
taics_support 0/7 Support the feature for Video
Surveillance System Security from
TAICS.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314b.
taics_level 0, 0/7 Indicate the support level for Video
Surveillance System Security from
TAICS.
* Only available when
"capability_taics_support" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314b.
cameralink_suppor
t 0/7 Indicate support for the feature of
camera link.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0315a.
© 2022 VIVOTEK INC. All Right Reserved
157
NAME VALUE SECURITY
(get/set) DESCRIPTION
cameralink_num 0, 0/7 Indicate the maximum number of
receiver camera link.
* Only available when
"capability_cameralink_support" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0315a.
cameralink_version 0/7 Indicate the version of camera link
feature.
* Only available when
"capability_cameralink_support" is 1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0315a.
7.27.1 Capability for Camctrl
Group: capability_camctrl_c<0~(n-1)> n denotes the value of "capability_nvideoin"
(capability_ptzenabled > 0)
* We support this group when the version number (httpversion) is equal or greater than 0303b.
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
ptztunnel 0/7 Indicate whether to support ptztunnel
in this video input.
privilege 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the security
page in this video input.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
rs485 0/7 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => support rs485-in
Bit 1 => support rs485-out