Dell UltraSharp 32" 6K HDR Video Conferencing Monitor - Manual (Page 70)

70 | Operating the monitor
Icon Menu and
Submenus
Description
Input Source Use the Input Source menu to select between different
video inputs that are connected to your monitor.
Exit
mDP
HDMI
Auto Select On
Auto Select for Thunderbolt Prompt for Multiple Inputs
Reset Input Source
Rename Inputs Thunderbolt (140W)
Thunderbolt (140W)
Input Source
Color
Brightness/Contrast
Display
PIP/PBP
Personalize
Others
Menu
USB
Audio & Webcam
UltraSharp 32 Monitor
Thunderbolt
(140W) Select Thunderbolt (140W) input when you are using
the Thunderbolt (140W) connector. Press the joystick
button to confirm the selection.
mDP Select mDP input when you are using the mDP (Mini
DisplayPort) connector. Press the joystick button to
confirm the selection.
HDMI Select the HDMI input when you are using the HDMI
connector. Press the joystick button to confirm the
selection.
Auto Select Allows you to scan for available input sources.
Press to select this function.
Auto Select for
Thunderbolt
Press to select these functions:
• Prompt for Multiple Inputs: always show Switch to
Thunderbolt Video Input message for user to choose
whether to switch or not.
• Yes: The monitor always switches to Thunderbolt video
by default while Thunderbolt is connected.
• No: The monitor will NOT auto switch to Thunderbolt
video from another available input.
Rename Inputs Allows you to Rename Inputs .
Reset Input
Source Resets all settings under the Input Source menu to the
factory defaults. Press to select this function.