Dell UltraSharp 32" 6K HDR Video Conferencing Monitor - Manual (Page 11)

About your monitor | 11
9 Hookswitch & LED LED will blink in green when there is an incoming
Teams/Skype for Business (SfB) call.
LED will light up in static green during Teams/Skype
for Business (SfB) call.
Short press to answer / end call.
Long press to reject incoming call.
10 Volume down & LED Short press for 2 unit volume decrement.
Long press for continuous volume decrement.
11 Volume up & LED Short press for 2 unit volume increment.
Long press for continuous volume increment.
12 Microphone mute
& LED Press to mute and unmute microphone.
LED will light up in static red when mic is muted.
LED will go dark when mic is enabled/unmuted.
13 Camera Mute & LED Press to lock and unlock camera shutter.
If locked, icon will light up in red, no software can
override and open camera shutter to use the camera.
If unlocked, icon will not light up, software can open
camera shutter to use the camera when it’s needed.
NOTE: This camera disable button must not be
confused with “Webcam and presence sensor:
enable / disable” in OSD.
Disabling “webcam & presence sensor” will turn off
the whole webcam module, webcam and sensor will
not appear in the system
.
14 USB Type-C
downstream port
(USB 3.2 Gen2) Port with icon supports 5 V/3 A.
Connect your USB device. You can use these ports
only after you have connected the USB cable (Type-A
to Type-C or Thunderbolt
TM 4) from the computer to
the monitor.
NOTE: This port is downstream only and unable to
broadcast video or sound to the display or speakers.
15 Super speed USB 10
Gbps (USB 3.2
Gen2) Connect your USB device. You can use these ports
only after you have connected the USB cable from the
computer to the monitor.
Port 15 with battery icon supports Battery
Charging Rev. 1.2.
16 Power LED indicator Solid white light indicates the monitor is turned on and
functioning normally. Breathing white light indicates
the monitor is in Standby Mode.