Sony E 16mm f/2.8 Lens - Manual (Page 58)

58
Live Auto” and “VPID/HDMI Auto” are both set to “On,” the settings of “Transfer Matrix,” “OETF,”
and “Color Space(Color Gamut)” in HDR SDR Relation Table take precedence.
 The two modes are available for reflecting the HDR SDR Relation Table. See page 39.
 This unit does not support the following functions of HDR SDR Relation Table.
No.17 Knee Saturation
No.18 Knee Saturation Level
No.19 Soft Knee
No.20 Knee Radius
No.23 HDR Knee
No.24 HDR Knee Point
No.25 HDR Knee Slope
 The OETF and color space (color gamut) of pre-conversion HDR signals that support SDR
conversion are as follows. If an unsupported OETF or color space (color gamut) is selected, the
HDR-SDR conversion function will not be enabled.
OETF
S-Log3(Live HDR)
ITU-R BT.2100(HLG)
SMPTE ST 2084(PQ)
S-Log3
Color Space
ITU-R BT.2020
ITU-R BT.709
 When the OETF of the input HDR is other than ITU-R BT.2100 (HLG) and the HDR Look is Natural,
"Conversion Mode" is processed as "SR AIR Off" regardless of its setting value.
5
Press the function button to which you assigned “Conversion” in step 1.
This unit automatically sets EOTF to 2.4(SDR) and color space (color gamut) to match “Out. Color
Space” of “Conv. Preset,” then displays the SDR converted signal on the screen. When the optional
“PVML-HSX1” license (sold separately) is activated, the SDR conversion signal is output as an SDI
signal from the ENHANCED MONITOR OUT connector.