Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 93)

93
Auto Exposure
Brightness
automatic
exposure settings
Auto Shutter
On / Off
Turns the auto shutter control function on/off.
A.SHT Limit
1/100 / 1/150 / 1/200 /
1/250 /
1/2000
Sets the fastest shutter speed of the auto shutter function.
A.SHT Point
F5.6 / F8 / F11 / F16
Sets the F-stop value of the iris where auto shutter operation
starts.
Clip High light
On / Off
Turns the function that ignores brightest areas to provide a
flatter response at high luminance on/off.
Detect Window
1 / 2 / 3 / 4 / 5 / 6 / Custom
Sets the light meter range for automatically adjusting the
exposure according to the brightness of the subject. (Not
available when adjusting exposure manually)
Detect Window Indication
On / Off
Turns the Detect Window function on/off.
Average Peak Level Ratio
–99 to +99 ( ±0 )
Sets the ratio between the average value and the peak of the
video signal used for Auto Exposure detection.
Custom Width
40 to 999 ( 500 )
Sets the width of the Detect Window.
Custom Height
70 to 999 ( 500 )
Sets the height of the Detect Window.
Custom H Position
–479 to +479 ( ±0 )
Sets the horizontal position of the Detect Window.
Custom V Position
–464 to +464 ( ±0 )
Sets the vertical position of the Detect Window.
Color Bars
Color bar settings
Setting
On / Off
Turns the color bars on/off.
Type
ARIB / 100% / 75% / SMPTE
Selects the type of color bars.
Flicker Reduce
Flicker correction
settings
Mode
Auto / On / Off
Sets the flicker correction mode.
Frequency
50Hz / 60Hz
(NTSC area:
60.00 , PAL area:
50.00 )
Sets the frequency of the power source supplying the lighting
that is causing the flicker.
Flash Band
Reduce
Flashband
correction settings
Setting
On / Off
Turns the flashband reduction function on/off. It reduces
blown out highlights at either the top or the bottom of the
image when shooting with a flash for a still camera.
Handle Zoom
Handle zoom
speed settings
Setting
Off / Low / High / Variable
Sets the speed of the handle zoom.
(Enabled when the handle zoom switch is set to FIX.)
High
1 to 8 ( 8 )
Sets the zoom speed of the handle zoom lever when High
handle zoom speed is selected.
Low
1 to 8 ( 3 )
Sets the zoom speed of the handle zoom lever when Low
handle zoom speed is selected.
Auto Black
Balance
Auto black balance
settings
Auto Black Balance
Execute / Cancel
Executes the auto black balance function.
Notes
• Cannot be set during recording or color bar display.
• Cannot be set when in Interval Rec mode, frame recording
mode, or slow shutter mode.
Camera
Item Sub-items and Settings Description