Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 115)

115
Wired LAN
Wired LAN
connection settings
Setting
On / Off
Turns the wired LAN function on/off.
Camera Remote Control
Enable / Disable
Sets whether to enable remote control from a device
connected to the camcorder by wired LAN.
Detail Settings Configures properties of the wired LAN connection.
DHCP
On / Off
Turns DHCP on/off.
IP Address Enter the IP address of the camcorder when DHCP is set to
Off.
Subnet Mask Enter the subnet mask of the camcorder when DHCP is set to
Off.
Gateway Enter the default gateway of the camcorder when DHCP is set
to Off.
DNS Auto
On / Off
Turns auto DNS acquisition on/off.
Primary DNS Server Enter the primary DNS server when DNS Auto is set to Off.
Secondary DNS Server Enter the secondary DNS server when DNS Auto is set to Off.
Modem
Modem settings
Setting
On / Off
Turns the modem connection on/off.
Device Name Displays the device name of the modem.
IP Address Displays the IP address of the modem.
Subnet Mask Displays the subnet mask of the modem.
Network Client
Mode
Network client
mode settings
Setting
On / Off
Starts (On) or stops (Off) network client mode.
NCM Settings Select Selects preset settings (NCM Settings1/NCM Settings2/NCM
Settings3) comprising network client mode connection
settings configured beforehand.
NCM Settings1
Display Name Sets the display name shown in the NCM Settings menu.
CCM Address Sets the address of the destination CCM or XDCAM air to
connect. Host name or IP address
CCM Port (1 to 65535 ( 8443 )) Sets the port number of the destination CCM or XDCAM air
to connect.
User Name Sets the user name for authentication of the CCM connection.
Password Sets the authentication password of the CCM connection.
CCM Certificate
Load / Clear / None
Loads a certificate when connecting to CCM or XDCAM air,
and clears settings.
CCM Certificate Status
Loaded / Default
Displays the certificate loading status when connecting to
CCM or XDCAM air.
Reset
Execute / Cancel
Resets the settings of NCM Settings to the defaults.
Execute: Execute function.
NCM Settings2 Same as NCM Settings1.
NCM Settings3 Same as NCM Settings1.
Network
Item Sub-items and Settings Description