beautypg.com

Changing basic settings, Monitoring audio while shooting, Video format – Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera User Manual

Page 30: Switching the exfat/udf/fat file system, Switching the system frequency, Switching the codec, Changing the format

background image

30

magnifier screen appears showing the part of the
image magnified.
The magnification switches between 4× and 8×
each time the button is pressed when the
recording format is QFHD. You can move the
magnified position using the

V

/

v

/

B

/

b

button.

The center of the screen is magnified at a fixed 2×
in recording formats other than QFHD.
Press the button again to return to the normal
screen.
This function is useful for checking the focus.

Note

• Even though the image appears magnified on the

screen, the recorded image is not magnified.

Connecting a set of headphones to the headphone
jack (stereo mini jack)

(page 10)

enables you to

monitor the audio being recorded.

Note

• The built-in speaker is disabled while shooting

(recording or recording standby).

To adjust the audio monitoring volume

Use the VOLUME buttons

(page 11)

.

To change the audio monitoring channel

Select the channel using Audio Output

(page 102)

in the Audio menu.

You can change the settings based on the video
application or recording conditions.

The formats available for selection vary
depending on the exFAT/UDF/FAT file system,
system frequency, and codec settings.

Switching the exFAT/UDF/FAT file
system

Switch using Rec Format

(page 118)

>File

System in the System menu.
The camcorder automatically restarts after
switching.

Note

• You cannot switch between exFAT/UDF/FAT during

recording or playback.

Switching the system frequency

Switch using Rec Format

(page 118)

>Frequency

in the System menu.
The camcorder automatically restarts after
switching.

Note

• You cannot switch the system frequency during

recording or playback.

Switching the codec

Switch using Rec Format

(page 118)

>Codec in

the System menu.

Note

• You cannot switch the codec during recording or

playback.

Changing the format

Switch using Rec Format

(page 118)

>Video

Format in the System menu.
The signals from the SDI OUT and HDMI OUT
connectors are also output in the format selected
using this menu.

Monitoring audio while shooting

Changing Basic Settings

Video format