Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 17)

17
Wired LAN settings
Modem settings
NCM/Streaming Status screen
Displays the connection status and streaming
status in network client mode.
Network Client Mode Status settings
Station Mode Non Active Not operating in
station mode.
Displayed when
Wi-Fi chip fails.
Searching Attempting to
connect to the
previously
connected network
(access point).
Disconnected Not connected to a
network (access
point).
Also displayed
when IP address
was not assigned
using DHCP.
Connected to
network
(access point).
Setting
display Status
display Description
Off --- Wired LAN setting
is off.
On Disconnected Disconnected from
network.
Also displayed
when IP address
was not assigned
using DHCP.
Connected Connected to a
network.
Setting
display Status
display Description
Off --- Modem setting is
off.
On Disconnected Not connected to a
network.
Connected Connected to a
network.
Connecting Attempting to
connect to a
network.
No Modem Modem dongle is
not inserted.
Setting
display Status
display Description
Network Client Mode
Status Network client mode status
CCM Name Name of connected CCM in
network client mode
CCM Address Address of connected CCM
in network client mode
Streaming Status Streaming status
Streaming Format Streaming format
information
Streaming Type Type of currently selected
streaming setting
Streaming Destination
Address Streaming destination
address
Streaming Audio
Channel Audio channel to
superimpose on streaming
output
Status display Description
Off Network client mode is off.
Connected Network client mode is on,
CCM/XDCAM air is
connected, and control from
CCM/XDCAM air is
enabled.
Connecting Attempting to connect to
CCM/XDCAM air.
Note
If the status does not change
from “Connecting,” the CCM
address setting may be
incorrect. Check that the
address is set correctly.
Destination Address
Error The host name or IP address
of the CCM to connect may
be incorrect.
Authentication Failed The user name or password
used to connect to the CCM
may be incorrect.
No Network Access Cannot connect to a network.
Check the network
connection status and
settings.
Certificate is not yet
Valid The CCM certificate is not
valid.
The network date and time
settings may be incorrect.