Connecting to the internet, Station mode), Modem and video output combinations – Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera User Manual
Page 59: Attaching a modem to the camcorder, Connecting
59
You can connect the camcorder to the Internet
using a modem, wired LAN, or wireless LAN.
You can connect the camcorder to the Internet via
a 3G/4G network by attaching an optional modem
to the unit.
For details about compatible modems, contact
your Sony dealer or a Sony service representative.
Notes
• A modem cannot be used at the same time as a wired
LAN.
• A modem cannot be used when using a BP-30 battery
pack.
Modem and video output combinations
A modem cannot be used if two or more of Output
On/Off
>SDI, HDMI, and VIDEO in
the Video menu are set to On.
All of them are set to On by default in Output On/
Off. To use a modem, set two or more outputs in
Output On/Off to Off.
To use a modem and wireless LAN at the same
time, set all outputs in Output On/Off to Off.
Note
• When using a modem and video output at the same
time, the brightness of the LCD screen decreases.
Attaching a modem to the camcorder
Attach the modem to the USB2.0 (HOST)
connector of the camcorder.
Note
• Attach/remove the modem while the camcorder is
turned off.
Connecting
1
Turn the camcorder on.
2
Set Modem >Setting in the Network
menu to On.
Note
• It may take some time (about 1 minute) to connect to a
3G/4G network. Wait until the network status indicator
“3G/4G” icon shows a strength of 1 or
higher on the LCD/viewfinder screen.
You can connect the camcorder to the Internet in
Wi-Fi station mode via an optional wireless LAN
router or by tethering to a device.
Connect to the access point or device as described
in
“Connecting using wireless LAN station
.
Connecting to the
Internet
Connecting using a modem
Connecting using wireless LAN
station mode (Wi-Fi station mode)
Smartphone/
tablet
Access
point
Computer
Internet
Internet
Smartphone/
tablet