Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 48)

48
4
Select Execute using the V / v / B / b button
or SEL/SET dial, and press the SET
button or SEL/SET dial.
Notes
• The camcorder will reboot automatically after loading
configuration data.
• When All File >Load Network Data in the File menu
is set to Off, all settings in the ALL file are loaded
except the Network menu settings.
Saving a scene file
To save in internal memory
1
Select Scene File >Store Internal
Memory >Execute in the File menu
(page 112) .
A scene file list screen appears.
If the File ID is set to “Standard” destination,
preconfigured standard settings are saved.
2
Select a save destination using the V / v /
B / b button or SEL/SET dial, and press
the SET button or SEL/SET dial.
The scene file is saved, overwriting any
existing file, in the selected destination.
3
Select Execute on the confirmation
screen using the
V / v / B / b button or
SEL/SET dial, and press the SET
button or SEL/SET dial.
To save on an SD card or “Memory Stick” media
1
Insert the SD card or “Memory Stick”
media into the UTILITY SD/MS slot
(page 9) with the label facing right.
2
Select Scene File >Save Utility SD/MS
>Execute in the File menu
(page 112) .
A scene file save destination screen appears.
3
Select a “No File” row on the save
destination window using the
V / v / B / b
button or SEL/SET dial, and press the
SET button or SEL/SET dial.
Selecting a row with a File ID entry will
overwrite the selected file.
The File ID is generated automatically, but
you can modify it.
4
Select Execute on the confirmation
screen using the
V / v / B / b button or
SEL/SET dial, and press the SET
button or SEL/SET dial.
Loading a scene file
To load from internal memory
1
Select Scene File >Recall Internal
Memory >Execute in the File menu
(page 112) .
A scene file list screen appears.
2
Select the file to load using the V / v / B / b
button or SEL/SET dial, and press the
SET button or SEL/SET dial.
A confirmation screen appears.
3
Select Execute using the V / v / B / b button
or SEL/SET dial, and press the SET
button or SEL/SET dial.
Scene files can also be loaded into the
camcorder using the direct menu
(page 37) .
To load from an SD card or “Memory Stick”
media
1
Insert the SD card or “Memory Stick”
media on which the file is saved into the
UTILITY SD/MS slot
(page 9) with the
label facing right.
2
Select Scene File >Load Utility SD/MS
>Execute in the File menu
(page 112) .
A scene file list screen appears.
3
Select the file to load using the V / v / B / b
button or SEL/SET dial, and press the
SET button or SEL/SET dial.
A confirmation screen appears.
4
Select Execute using the V / v / B / b button
or SEL/SET dial, and press the SET
button or SEL/SET dial.