Sony XDCA-FX9 Extension Unit for PXW-FX9 Camera - Manual (Page 29)

29
Using the zoom ring
1. Set the ZOOM switch D to MANUAL.
2. Zoom by turning the zoom ring B .
You can zoom at the desired speed by turning
the zoom ring
B . Fine adjustment is also
possible.
Tips for focusing
• Move the power zoom lever towards T
(telephoto) and adjust the focus, then, towards
W (wide angle) to adjust the zoom for
recording.
• When you want to record a close-up image of a
subject, move the power zoom lever towards W
(wide angle) to fully magnify the image, then
adjust the focus.
Adjusting in Full MF mode
Pull the focus ring A toward the back (toward
the camcorder) to activate Full MF mode for full
manual focus control.
Turn the focus ring to adjust the focus while
monitoring the image on the LCD/viewfinder
screen.
In Full MF mode, you can use the distance
markers printed on the focus ring as a guide when
adjusting the focus. The distances where the
picture is in focus correspond to the positions of
the distance markers.
Notes
• Do not use excessive force at both ends of the travel
when turning the focus ring.
• While in Full MF mode, the auto focus and push auto
focus functions do not work.
• The macro is set to OFF regardless of the setting of the
lens MACRO switch.
Adjusting in MF mode
In MF (manual focus) mode, you can also use
auto focus operation whenever required.
Slide the focus ring
A toward the front (toward
the lens hood) and set the FOCUS switch C to
MANUAL.
Using automatic focus temporarily (Push auto
focus)
In MF mode, auto focus is activated while the
FOCUS PUSH AUTO button
D of the lens is
pressed or while an assignable button (page 40)
assigned with Push AF/Push MF is pressed.
The focus returns to manual focus when you
release the button.
This function is useful for shifting the focus from
one subject to another during manual focus mode.
Adjusting in AF mode
In AF (auto focus) mode, the focus is adjusted
automatically.
Slide the focus ring
A toward the front and set
the FOCUS switch C to AUTO.
Using manual focus temporarily (Push manual
focus)
In AF mode, manual focus is activated while the
FOCUS PUSH AUTO button of the lens is
pressed or while an assignable button
(page 40)
assigned with Push AF/Push MF is pressed.
The focus returns to auto focus when you release
the button.
Using macro mode
In MF mode or AF mode, set the MACRO switch
B to the ON position to activate macro mode to
enable focusing over a range that includes the
macro area.
Macro mode is disabled in Full MF mode.
Focusing using magnified view
(Focus Magnifier)
When an assignable button (page 40) assigned
with Focus Magnifier is pressed, the focus
Adjusting the focus
AF/MF
mode
Full MF mode