Basic application functions, Station initialization, Cyclic data transmission – ProSoft Technology 5201-MNET-101S User Manual
Page 137: Read procedure, Spontaneous transmission
IEC-101 Slave ♦ ProLinx Communication Gateway
IEC 60870-5-101 Slave Interoperability Statement
IEC 60870-5-101 v3 Slave (Firmware version 3.xx)
Protocol Manual
ProSoft Technology, Inc.
Page 137 of 159
August 6, 2010
6.8 Basic Application Functions
6.8.1 Station Initialization
(Station-specific parameter; mark "
X" if function is used)
Remote initialization
6.8.2 Cyclic Data Transmission
(Station-specific parameter; mark "
X" if function is only used in the standard
direction, "
R" if only used in the reverse direction, and "B" if used in both
directions)
Cyclic data transmission
6.8.3 Read Procedure
(Station-specific parameter; mark "
X" if function is only used in the standard
direction, "
R" if only used in the reverse direction, and "B" if used in both
directions)
Read procedure
6.8.4 Spontaneous Transmission
(Station-specific parameter; mark "
X" if function is only used in the standard
direction, "
R" if only used in the reverse direction, and "B" if used in both
directions)
Spontaneous transmission