ProSoft Technology 5201-MNET-101S - Manual (Page 130)

IEC 60870-5-101 Slave Interoperability Statement IEC-101 Slave ♦ ProLinx Communication Gateway
Protocol Manual IEC 60870-5-101 v3 Slave (Firmware version 3.xx)
Page 130 of 159 ProSoft Technology, Inc.
August 6, 2010
6.1 System or Device
 System definition
 Controlling station definition (Master)
 Controlled station definition (slave)
6.2 Network Configuration
(Network-specific parameter)

Point-to-point  Multipoint-party line
 Multiple point-to-point  Multipoint-star
6.3 Physical Layer
(Network-specific parameter)
6.3.1 Transmission Speed (Control Direction)
Unbalanced interchange
Circuit V.24/V.28
Standard
Unbalanced interchange
Circuit V.24/V.28
Recommended if > 1200 bit/s
Balanced
interchange
Circuit X.24/X.27
 100 bit/s  2400 bit/s  2400 bit/s  56000 bit/s
 200 bit/s  4800 bit/s  4800 bit/s  64000 bit/s
 300 bit/s  9600 bit/s  9600 bit/s
 600 bit/s  19200 bit/s
 1200 bit/s  38400 bit/s
6.3.2 Transmission Speed (Monitor Direction)
Unbalanced interchange
Circuit V.24/V.28
Standard
Unbalanced interchange
Circuit V.24/V.28
Recommended if > 1200 bit/s
Balanced
interchange
Circuit X.24/X.27
 100 bit/s  2400 bit/s  2400 bit/s  56000 bit/s
 200 bit/s  4800 bit/s  4800 bit/s  64000 bit/s
 300 bit/s  9600 bit/s  9600 bit/s
 600 bit/s  19200 bit/s
 1200 bit/s  38400 bit/s