Set time command block, Request block – ProSoft Technology 5201-MNET-101S User Manual
Page 125
IEC-101 Slave ♦ ProLinx Communication Gateway
Reference
IEC 60870-5-101 v3 Slave (Firmware version 3.xx)
Protocol Manual
ProSoft Technology, Inc.
Page 125 of 159
August 6, 2010
Set Time Command Block
This functionality allows a remote node to set the clock of the ProLinx gateway.
Request Block
The following table describes the structure of the Set Time command block.
Start Word
End Word
Description
0
0
200 or 201 = Set Time (Block ID1)
1
1
Block ID2 (Command Request With Response)
2
2
Year
3
3
Month
4
4
Day
5
5
Hour
6
6
Minutes
7
7
Seconds & milliseconds
8
98
Reserved for future use
99
99
200 or 201 = Set Time (Block ID1)
This manual is related to the following products: