ProSoft Technology MVI56E-MCM/MCMXT User Manual
Page 186

Reference
MVI56E-MCM ♦ ControlLogix Platform
User Manual
Modbus Communication Module
Page 186 of 199
ProSoft Technology, Inc.
June 18, 2014
3 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.
4 When the download is complete, RSLogix will open another confirmation
dialog box. Click OK
to switch the processor from PROGRAM mode to RUN
mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to
interpret and correct the error.
6.10.2 Using the Sample Program in an Existing Application
1 Open the Sample Ladder Logic in RSLogix 5000.
2 Start another instance of RSLogix 5000, and then open your existing
application.
You will be adding the MVI56E-MCM module definition, and then copying
controller tags, ladder logic, and user defined data types from the sample
application into your existing application.
Defining Module in I/O Configuration
Note: You cannot perform this procedure while you are online to the controller.