ProSoft Technology MVI56E-MCM/MCMXT - Manual (Page 173)

MVI56E-MCM ♦ ControlLogix Platform Reference
Modbus Communication Module User Manual
ProSoft Technology, Inc. Page 173 of 199
June 18, 2014
Note: This is an optional feature. You can perform the same task through PCB (ProSoft
Configuration Builder). Even if your PC is in a different network group you can still access the
module through PCB by setting a temporary IP address.
 Read/Write Module Clock Value
Allows the processor to read and write the module clock settings. The module
clock stores the last time that the Ethernet configuration was changed. The
date and time of the last Ethernet configuration change is displayed in the
scrolling LED during module power up.
Important: The Optional Add-On Instruction only supports the two features listed above. You must
use the sample ladder logic for all other features including backplane transfer of Modbus data.
6.9.3 Importing the Utility Add-On Instruction
1 Right-click on an empty rung in the main routine of your existing ladder logic
and choose I MPORT R UNGS
…