ProSoft Technology 3170-PDP - Manual (Page 76)

3170-PDP ♦ FLEX Platform Reference
FLEX I/O™ PROFIBUS Adapter
Page 76 of 152 ProSoft Technology, Inc.
August 23, 2007
Text(6) = "64"
Text(7) = "128"
EndPrmText
PrmText = 29
Text(0) = "No multiplier"
Text(1) = "X2"
Text(2) = "X4"
Text(3) = "X32"
EndPrmText
PrmText = 30
Text(0) = "Safe state act by bus comm"
Text(1) = "Safe state act by any failure"
EndPrmText
PrmText = 31
Text(0) = "Reset outputs"
Text(1) = "Hold last state"
EndPrmText
PrmText = 32
Text(0) = "Disabled"
Text(1) = "Alarm only(frequency unchanged)"
Text(2) = "Alarm and force frequency to max"
Text(3) = "Alarm and force frequency to min"
EndPrmText
PrmText = 33
Text(0) = "No multiplier, alarm immediately"
Text(1) = "2 sample periods + 2s delay"
Text(2) = "8 sample periods + 2s delay"
Text(3) = "32 sample periods + 2s delay"
EndPrmText
PrmText = 34
Text(0) = "Frequency alarm"
Text(1) = "Acceleration alarm"
EndPrmText
PrmText = 35
Text(0) = "Rolling average"
Text(1) = "8"
Text(2) = "16"
Text(3) = "32"
EndPrmText
PrmText = 36
Text(0) = "Normal run mode"
Text(1) = "Startup mode"
EndPrmText
PrmText = 37
Text(0) = "2"
Text(1) = "4"
Text(2) = "5"
Text(3) = "10"