ProSoft Technology 3170-PDP - Manual (Page 2)

Please Read This Notice
Successful application of this module requires a reasonable working knowledge of the Rockwell
Automation hardware, the 3170-PDP Module and the application in which the combination is to be
used. For this reason, it is important that those responsible for implementation satisfy themselves
that the combination will meet the needs of the application without exposing personnel or
equipment to unsafe or inappropriate working conditions.
This manual is provided to assist the user. Every attempt has been made to assure that the
information provided is accurate and a true reflection of the product's installation requirements. In
order to assure a complete understanding of the operation of the product, the user should read all
applicable Rockwell Automation documentation on the operation of the Rockwell Automation
hardware.
Under no conditions will ProSoft Technology be responsible or liable for indirect or consequential
damages resulting from the use or application of the product.
Reproduction of the contents of this manual, in whole or in part, without written permission from
ProSoft Technology is prohibited.
Information in this manual is subject to change without notice and does not represent a
commitment on the part of ProSoft Technology Improvements and/or changes in this manual or the
product may be made at any time. These changes will be made periodically to correct technical
inaccuracies or typographical errors.
Solid state equipment has operational characteristics differing from those of electromechanical
equipment. "Safety Guidelines for the Application, Installation and Maintenance of Solid State
Controls" (Publication SGI-1.1) describes some important differences between solid state
equipment and hard-wired electromechanical devices. Because of this difference, and also
because of the wide variety of uses for solid state equipment, all persons responsible for applying
this equipment must satisfy themselves that each intended application of this equipment is
acceptable.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of
the many variables and requirements associated with any particular installation, ProSoft
Technology, Inc. cannot assume responsibility or liability for actual use based on the examples and
diagrams.
No patent liability is assumed by ProSoft Technology, Inc. with respect to use of information,
circuits, equipment, or software described in this manual.
Throughout this manual we use notes to make you aware of safety considerations.
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death,
property damage, or economic loss.
Attentions help you:
ƒ
identify a hazard
ƒ avoid the hazard
ƒ recognize the consequences
Important: Identifies information that is especially important for successful application and
understanding of the product.
Microsoft is a registered trademark of the Microsoft Corporation.
Windows is a trademark of the Microsoft Corporation.
FLEX I/O and PLC-5 are trademarks of the Rockwell Automation Company, Inc.
PROFIBUS is a trademark of the PROFIBUS User Organization