ProSoft Technology 3170-PDP - Manual (Page 71)

Reference 3170-PDP ♦ FLEX Platform
FLEX I/O™ PROFIBUS Adapter
ProSoft Technology, Inc. Page 71 of 152
August 23, 2007
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
; Supported hardware features
Redundancy = 0 ; not supported
Repeater_Ctrl_Sig = 2 ; TTL
24V_Pins = 0 ; not connected
Implementation_Type = "SPC3"
; Supported DP features
Freeze_Mode_supp = 1 ; supported
Sync_Mode_supp = 1 ; supported
Auto_Baud_supp = 1 ; supported
Set_Slave_Add_supp = 0 ; not supported
; Max Length of User Parameter
Max_User_Prm_Data_Len = 237
; Maximum polling frequency
Min_Slave_Intervall = 1 ;100 µs
; Maximum supported sizes
Modular_Station = 1 ; modular
Max_Module = 9 ; physical modules = slots
Max_Input_Len = 244
Max_Output_Len = 244
Max_Data_Len = 488
Modul_Offset = 1
Slave_Family = 3
Max_Diag_Data_Len = 15
; Meaning of "device diagnostic" field
;The first two bytes (corresponding to Unit_Diag_Area = 0-15)
;contains information about the actual firmware version.
;The third byte (corresponding to Unit_Diag_Area = 16-23)
;indicates if the address switch has been altered.
Unit_Diag_Bit (16) = "Node address changed"
;The fourth byte (corresponding to Unit_Diag_Area = 24-31) contains ;the current
setting of the node address switch.
;Please look at the user manual (section "Troubleshooting") for a detailed
;explanation about the meaning of these bytes.
;---------------------------------
;Prm-Text-Def-List: The Flag byte
;---------------------------------
;Format selection
PrmText = 1
Text(0) = "Auto Configure format"
Text(2) = "Condensed format"
Text(3) = "Full format"
EndPrmText