ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 85)

MVI56E-MNET / MNETXT ♦ ControlLogix Platform Ladder Logic
Modbus TCP/IP Interface Module User Manual
ProSoft Technology, Inc. Page 85 of 181
April 23, 2014
3.4.4 MNET.UTIL
Controller Tag Description
CmdControl This group of tags is used to control special or irregular execution of
the commands listed in the configuration under the MNet Client 0
Commands section, regardless of whether or not such commands
are normally enabled or disabled.
EventCmd This group of tags is used to create and have the Client execute a
special ladder logic constructed command that is not included in the
MNet Client 0 Commands section of the configuration file.
InitOutputData This group of tags is used for setting up data values when the
module performs a re
start operation. It will request the processor’s
output data and transfer it into the module’s Modbus registers.
Use the Initialize Output Data parameter in the configuration file to
bring the module to a known state after a restart operation.
PassThru Th is group of tags is used for transferring a remote Client’s write
commands through the MNET module straight into the processor’s
controller tags without first storing the data in the module's Modbus
registers.
IPsetPending Allows setting module IP address
IPgetPending Allows getting module IP address
For more information, refer to Special Function Blocks (page 119).