ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 151)

MVI56E-MNET / MNETXT ♦ ControlLogix Platform Reference
Modbus TCP/IP Interface Module User Manual
ProSoft Technology, Inc. Page 151 of 181
April 23, 2014
5.6 Using the Optional Add-On Instruction Rung Import
5.6.1 Before You Begin
 Make sure that you have installed RSLogix 5000 version 16 (or later).
 Download the Optional Add-On file
MVI56EMNET_Optional_AddOn_Rung_v1_0.L5X from
www.prosoft-technology.com or copy it from the ProSoft Solutions DVD.
 Save a copy in a folder in your PC.
5.6.2 Overview
The Optional Add-On Instruction Rung Import contains optional logic for MVI56E-
MNET applications to perform the following tasks.
 Read/Write Ethernet Configuration
Allows the processor to read or write the module IP address, netmask and
gateway values.
Note: This is an optional feature. You can perform the same task through PCB (ProSoft
Configuration Builder). Even if your PC is in a different network group you can still access the
module through PCB by setting a temporary IP address.
 Read/Write Module Clock Value
Allows the processor to read and write the module clock settings. The module
clock stores the last time that the Ethernet configuration was changed. The
date and time of the last Ethernet configuration change is displayed in the
scrolling LED during module power up.
Important: The Optional Add-On Instruction only supports the two features listed above. You must
use the sample ladder logic for all other features including backplane transfer of Modbus TCP/IP
data.