ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 59)

MVI56E-MNET / MNETXT ♦ ControlLogix Platform Configuring the MVI56E-MNET Module
Modbus TCP/IP Interface Module User Manual
ProSoft Technology, Inc. Page 59 of 181
April 23, 2014
2.3 Connecting Your PC to the Module
With the module securely mounted, connect one end of the Ethernet cable to the
Config (E1) Port, and the other end to an Ethernet hub or switch accessible from
the same network as your PC. You can also connect directly from the Ethernet
Port on your PC to the Config (E1)
Port on the module by using an Ethernet
crossover cable (not included).