ProSoft Technology MVI56E-MNET/MNETXT User Manual

Page 17

Text mode
Original mode

MVI56E-MNET / MNETXT ♦ ControlLogix Platform

Start Here

Modbus TCP/IP Interface Module

User Manual

ProSoft Technology, Inc.

Page 17 of 181

April 23, 2014

4 Make a note of the slot location. You must identify the slot in which the

module is installed in order for the sample program to work correctly. Slot
numbers are identified on the green circuit board (backplane) of the
ControlLogix rack.

5 Turn power ON.

Note: If you insert the module improperly, the system may stop working or may behave
unpredictably.

Note: When using the MVI56EMNETXT, you must use the 1756-A5XT or 1756-A7LXT chassis. In

these chassis, modules are spaced further apart than in standard ControlLogix chassis. Blank

spacers are inserted between active modules.