ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 61)

MVI56E-MNET / MNETXT ♦ ControlLogix Platform Configuring the MVI56E-MNET Module
Modbus TCP/IP Interface Module User Manual
ProSoft Technology, Inc. Page 61 of 181
April 23, 2014
3 In the Diagnostics window, click the S ET U P C ONNECTION button.
4 In the Connection Setup dialog box, click the B ROWSE D EVICE ( S ) button to
open the ProSoft Discovery Service. Select the module, then right-click and
choose A
SSIGN T EMPORARY IP.
5 The module’s default IP address is 192.168.0.250. Choose an unused IP
within your subnet, and then click OK.
Important: The temporary IP address is only valid until the next time the module is initialized. For
information on how to set the module’s permanent IP address, see Ethernet Configuration (page
58).