ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 166)

Reference MVI56E-MNET / MNETXT ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module
Page 166 of 181 ProSoft Technology, Inc.
April 23, 2014
5.8.3 Selecting the Slot Number for the Module
The sample application is for a module installed in Slot 1 in a ControlLogix rack.
The ladder logic uses the slot number to identify the module. If you are installing
the module in a different slot, you must update the ladder logic so that program
tags and variables are correct, and do not conflict with other modules in the rack.
To change the slot number
1 In the Controller Organization list, select the module, and then click the right
mouse button to open a shortcut menu.
2 On the shortcut menu, choose P ROPERTIES . This action opens the Module
Properties dialog box.
3 In the S LOT field, use the up and down arrows on the right side of the field to
select the slot number where the module will reside in the rack, and then click
OK.
RSLogix will automatically apply the slot number change to all tags, variables
and ladder logic rungs that use the MVI56E-MNET slot number for computation.