ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 63)

MVI56E-MNET / MNETXT ♦ ControlLogix Platform Configuring the MVI56E-MNET Module
Modbus TCP/IP Interface Module User Manual
ProSoft Technology, Inc. Page 63 of 181
April 23, 2014
2.4 Downloading the Project to the Module
Note: For alternative methods of connecting to the module with your PC, refer to Using CIPconnect
to Connect to the Module (page 64) or Using RSWho to Connect to the Module (page 73).
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, click once to select the
MVI56E-MNET module.
2 Open the P ROJECT menu, and then choose M ODULE / D OWNLOAD .
This action opens the Download dialog box. Notice that the Ethernet address
field contains the temporary IP address you assigned previously. ProSoft
Configuration Builder will use this temporary IP address to connect to the
module.
Click T EST C ONNECTION to verify that the IP address allows access to the
module.
3 If the connection succeeds, click D OWNLOAD to transfer the Ethernet
configuration to the module.