ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 164)

Reference MVI56E-MNET / MNETXT ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module
Page 164 of 181 ProSoft Technology, Inc.
April 23, 2014
4 When RSLogix has established communication with the processor, the
Connected To Go Online dialog box will open.
5 In the Connected To Go Online dialog box, click the G ENERAL tab. This tab
shows information about the processor, including the Revision (firmware)
version. In the following illustration, the firmware version is 11.32
6 Select the sample ladder logic file for your firmware version.
To open the sample program
1 On the Connected to Go Online dialog box, click the S ELECT F ILE button.
2 Choose the sample program file that matches your firmware version, and
then click the S ELECT button.
3 RSLogix will load the sample program.
The next step is to configure the correct controller type and slot number for your
application.