ProSoft Technology MVI56E-MNET/MNETXT - Manual (Page 114)

Reference MVI56E-MNET / MNETXT ♦ ControlLogix Platform
User Manual Modbus TCP/IP Interface Module
Page 114 of 181 ProSoft Technology, Inc.
April 23, 2014
Status Data in the Read Block
The following table describes in more detail the status information contained in
the Read block.
Word Offset Content Description
202 Program Scan Count This value is incremented each time a complete
program cycle occurs in the module.
203 Read Block Count This field contains the total number of read blocks
transferred from the module to the processor.
204 Write Block Count This field contains the total number of write blocks
transferred from the processor to the module.
205 Parse Block Count This field contains the total number of blocks
successfully parsed that were received from the
processor.
206 Command Event Block
Count This field contains the total number of command event
blocks received from the processor.
207 Command Block Count This field contains the total number of command blocks
received from the processor.
208 Error Block Count This field contains the total number of block errors
recognized by the module.
209 Product Code 1 This register displays the first word of the product code
in ASC format
210 Product Code 2 This register displays the second word of the product
code in ASC format
211 Version number This register displays the version number in decimal
values. For example, if the version number is 1.51, it
will display as 151.
212 Reserved Not used
213 Reserved Not used
214 Reserved Not used
215 Reserved Not used
216 Reserved Not used
217 Reserved Not used
218 Reserved Not used
219 Reserved Not used
220 Reserved Not used
221 Reserved Not used
222 MNet Request Count This counter increments each time an MNet (port 2000)
request is received.
223 MNet Response Count This counter is incremented each time an MNet (port
2000) response message is sent.
224 MNet Errors Sent Count This counter increments each time an MNet (port 2000)
sends an exception response to Client. Example: Client
sent illegal Modbus Data location address.
225 MNet Errors Received
Count This counter increments each time an MNet (port 2000)
receives a bad command. Example: Client sent illegal
function command.
226 Configuration Error Word This word contains a bit map that indicates Client and
server configuration errors.
227 Reserved Not used
228 Reserved Not used