PLANET NAS-7410 - Manual (Page 37)

4-Bay SATA NAS RAID Server with iSCSI
NAS-7410
37
4.8 SNMP settings
Simple network management protocol (SNMP) provides the ability to monitor and gives status
information of the SNMP agent to the SNMP management console. NAS server behaves as an
SNMP agent that answers requests from management console and sends trap information to it.
Item Description
Community
A name serves as a simple authentication. The communication
between the SNMP management console and the NAS server
cannot be established if the community names are mismatched.
IP IP address of the SNMP management console.
Trap
A trap is a voluntary message sent out from an SNMP agent
(which is in this case your NAS server) when there is an event
occurred.
Management
Configure the SNMP management console as Read Only or Full
Control.
Location Provides location information on the SNMP agent.
Contact
Provide name of the contact person who has the management
information on the SNMP agent.
Configuring SNMP settings
1. Click the Enable SNMP Protocol checkbox to enable SNMP accessing.