PLANET NAS-7410 - Manual (Page 23)

4-Bay SATA NAS RAID Server with iSCSI
NAS-7410
23
The administrator can delegate the administrator’s privilege to other users by including them into
the Admins built-in group. Please select the Security→Account menu. Select Admins* in the
Local User/Group window and click Property. Specify the users to have the privilege and click
Apply.
3.4 Enabling UPS support
The NAS server supports UPS and basic power management functions. It sends alerts when there
are power events like utility power failure or low battery capacity. When power events occur, the
NAS server can shut down itself automatically to prevent potential data loss.
To use smart-signaling UPS, connect UPS to the NAS server with an RS-232 or USB cable. Then
go to the Server UPS Settings menu on the administration page to enable UPS support.
To use network-type UPS, connect the UPS to the LAN first. Then go to the Server UPS Settings
page on the administration page. Enable APC Smart UPS series, such as USB UPS, and Generic
serial UPS Type 1 and Type 2. Select Network UPS from the UPS Type menu and enter the UPS
IP address and correct community.