PLANET NAS-7410 - Manual (Page 107)

4-Bay SATA NAS RAID Server with iSCSI
NAS-7410
104
Follow the instructions in the setup wizard to install NAS Finder. It will create shortcuts on
Desktop and in the Programs folder of the Start me.
Discovering NAS system
When started, NAS Finder automatically discovers all the NAS systems on the network and
displays a list of servers under the node Local Server. NAS Finder will automatically refresh
the server list at a specified interval. The default interval is 10 minutes.
NAS Finder can also locate NAS servers by IP addresses. It is useful when NAS servers are
on the Internet or located in different network segments from the NAS Finder. To locate NAS
servers by IP addresses, select “Remote NAS List” from the “File” menu. Click the “Add” button
and enter the IP address of the NAS server.
To set the automatic refresh interval
1. Go to “Tool → NAS Finder Options” menu.
2. Enter a number between 1 to 60 minutes.
3. Click “OK”.
Server Quick Setup Using NAS Finder
You can perform initial setup for your NAS system using NAS Finder.
1. Click the button on the toolbar.
2. Or, go to “Server -> Server Quick Setup”.
3. Select a NAS Server from the server list and click “Next” button.
4. Choose the “Network Teaming Mode” from the pull down menu. If you are not clear about
this feature, continue with the default value. (Refer to Chapter 4.2 TCP/IP Settings)
5. If you want the IP settings to be assigned automatically, click “Obtain IP settings
automatically”.
6. Or, you can specify the IP settings manually.
7. Click “Next” button to go to the next page.
8. Enter the “Server Name, Server Comment”, and “Workgroup/Domain Name” and select
either the “Workgroup mode” or “Domain mode”. Note that this is the server name as it
appears on the network which is irrelevant to the network protocol used.
9. Click “Next” button to go to the next page.
10. Change the admin password if necessary. Click the “OK” button to save the settings. Note
that server may need to reboot for certain parameters changes to take effect.