PLANET NAS-7410 - Manual (Page 106)

4-Bay SATA NAS RAID Server with iSCSI
NAS-7410
103
Appendix B Utility for NAS system
NAS Finder is powerful software that discovers and administers NAS Servers on the network,
and remotely loads disc images into the NAS Server. You can either duplicate a whole CD or
build an image from a group of files. Sharing and publishing data are never been so easy.
Use NAS Finder to display and modify the setting you have created. You can also perform
server settings replication from a configured server to other NAS Servers on the network.
Server parameters of a NAS Server can be imported into other NAS Server to avoid tedious
setup process to each individual unit on the network.
Features:
Server Management
● Discovers all NAS Servers on the network
● Configures NAS Servers for the first-time setup or quick setup
● Export / Import NAS Servers system settings Creating CD Images Remotely -
● Remotely loads CD images from a local CD-ROM drive into a NAS Server
● Collect and duplicates files into NAS Servers as a single CD image
● Allows users to assign 6 different destination servers when building CD images
● Fully integrates the CD-R function of the NAS Server
● Supports up to 16 different tasks User Interface -
● Explorer-like user interface together with user friendly wizards
● Task Manager monitors all on-going and scheduled tasks
System Requirement
● IBM PC or compatible with 80486 processor or higher
● At least 8 MB of free memory (16 MB is recommended)
● Minimum 5MB of free hard disk space
● VGA or higher resolution monitor
● Microsoft Windows 95/98/98SE/ME, Windows NT/2000/XP
Installing TCP/IP Protocol for Microsoft Networks
NAS Finder communicates with NAS Servers through the TCP/IP protocol. You must install
“Client for Microsoft Networks” and the “TCP/IP” protocol in Windows to use NAS Finder.
Installing NAS Finder
You are ready to install this utility if the TCP/IP protocol is installed in your computer. To install
NAS Finder, insert the Utility CD into the CD-ROM drive. On the auto-run interface, click
“Install NAS Finder”. If the auto-run interface does not appear, go to X:\NAS Finder and run”
NAS Finder.exe”, where X is the drive letter of the CD-ROM drive.