PLANET NAS-7410 - Manual (Page 124)

4-Bay SATA NAS RAID Server with iSCSI
NAS-7410
121
NAS-7410?
How does NAS-7410 handle
the repair of the flash system
in the event of a crash?
NAS-7410 features with the system configuration backup/restore
function to protect the system configuration from system crash.
Event Log and Notification
Does the NAS-7410 support
SNMP protocol for sending
traps to the administrator?
Yes, you can manipulate the NMS software (For example, HP
OpenView) to receive relative traps.
How can I send an email
event to administrator?
You can follow the steps below to set up email event:
1. Go to NAS-7410 Admin Home page and select "Network Settings".
2. Select the sub menu "Email".
3. Enable SMTP Protocol.
4. Fill in correct SMTP server IP address or Fully Qualified Domain
Name (FQDN). (* If you fill in FQDN, please make sure you have set
DNS server IP address inside NAS-7410.)
5. Fill in a legal user account for login SMTP server purpose.
6. Based on your need, fill in one or two Email Addresses.
7. Click "Apply" and then select "Event" menu to configure further
settings.
8. Click "Advance" button in "Configuration" sub menu of "Event".
9. Enable "Email Alert".
10. Check "Event List for Notification" to decide which events can be
sent to administrator via email.
11. Click "Apply" button to complete settings.
How can I send Traps to my
NMS?
You can follow the steps below to configure:
1. Go to NAS-7410 Admin Home page and select "Network Settings".
2. Select the sub menu "SNMP".
3. Enable SNMP Protocol.
4. Fill in your server IP address (with NMS installed) that you want to
receive traps and then make sure the "Trap" column is set to "YES".
5. Click "Apply" and then select "Event" menu to configure further
settings.
6. Click "Advance" button in "Configuration" sub menu of "Event".
7. Enable "SNMP Trap".
8. Check "Event List for Notification" to decide which events can be
sent to NMS via trap.
9. Click "Apply" button to complete settings.