PLANET NAS-7410 - Manual (Page 28)

4-Bay SATA NAS RAID Server with iSCSI
NAS-7410
28
The “TCP/IP Suite Settings” section shows the various TCP/IP settings of the server.
Item Description
Port Display Ethernet port #.
IP Address An identifier for a network resource on a TCP/IP network.
Subnet Mask
A subnet mask is used to determine what subnet an IP address
belongs to.
Gateway
A node on a network that works as a point of entry to another
network.
Speed/Mode 10/100/1000 Mbps and full/half duplex.
Network Teaming
Mode
Display the current network teaming mode.
Obtain TCP/IP
settings from
Display the IP settings that is either assigned automatically from
DHCP or assigned manually.
WINS Server IP
Address
Windows Internet Naming Service (WINS) manages the
association of network resources name and its IP addresses
without the user or an administrator having to be involved in each
configuration change.
DNS Server IP
Address
IP address of the domain name system (DNS) server which
locates the domain names and translates it into IP addresses.
DNS Suffix Display the DNS suffix.
NTP Time Server IP
Address
The IP address of the NTP (Network Time Protocol) server is
used to synchronize system time automatically over the net. The
system time will be synchronized with the NTP server every 24
hours.
SMTP Server Address
IP address or server name of the SMTP (Simple Mail Transfer
Protocol) server used in sending and receiving e-mail.
HTTP Proxy Server IP
Address
IP address of the HTTP proxy server. Next to the IP address is
the port number.
4.2 TCP/IP settings
TCP/IP handles network communications between network nodes that are connected to the
network. It is important to set up correct TCP/IP setting for NAS server to function properly.