PLANET SGSD-1022 - Manual (Page 594)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
show interfaces protocol-group
This command shows the mapping from protocol groups to VLANs for the selected interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
• ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-12)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for protocol group 1 will be mapped to VLAN 2:
Console# show interfaces protocol-vlan protocol-group
Port ProtocolGroup ID Vlan ID
Eth 1/1 1 vlan2
Console#
594