PLANET SGSD-1022 - Manual (Page 28)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
1.5 Product Specification
Product SGSD-1022 SGSD-1022P SGSW-2840 SGSW-2840R SGSW-2840P SGSW-2840P4
Hardware Specification
10/100Mbps Copper
Ports
8-Port 10/ 100Base-TX RJ-45
Auto-MDI/MDI-X
24-Port 10/ 100Base-TX RJ-45
Auto-MDI/MDI-X
1000Mbps Copper
Ports
2 4
SFP/mini-GBIC Slots
2, shared with Port-9 and
Port-10
4 1000Base-SX/LX/BX, shared with Port-25~Port-28,
Port -25, Port-26 compatible with 100Base-FX SFP
Switch Architecture Store-and-Forward
Switch Fabric 5.6Gbps / non-blocking 12.8Gbps / non-blocking
Switch Throughput 4.16Mpps @64Bytes 9.52Mpps @64Bytes
Address Table 8K entries
Share Data Buffer 2 Mbits
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED
Power, Link/Act
and speed per
port
Power,
Link/Act, PoE
and speed per
port
Power,
Link/Act and speed per port Power, Power alarm, FAN alarm
Link/Act and PoE In-Use per port
Power Consumption
Max. 10.5 watts
/ 32.6 BTU Max. 130 watts
/ 443 BTU
Max. 20 watts / 68.5 BTU
Max. 240 watts
/ 818 BTU Max. 400 watts
/ 1364 BTU
Dimensions ( W x D
x H)
330 x 155 x
43.5mm
1U height 330 x 155 x
43.5mm
1U height
440 x 200 x 44.5mm, 1U height 440 x 300 x 44.5mm, 1U height
Weight 1.2kg 2.0kg 2.8 kg 3.0kg 4.3kg 4.8kg
Power Supply AC 100~240V, 50/60Hz
AC 100~240V,
50/60Hz
AC : 100~240V,
50/60Hz
DC: 30~60V
AC 100~240V, 50/60Hz
Layer 2 Function
Management
Interface
Console, Telnet, SSH, Web Browser, SSL, SNMPv1, v2c and v3
Port Configuration
Port disable / enable
Auto-negotiation
10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port Status
Display each port’s speed duplex mode, link status and Flow control status. Auto negotiation status,
trunk status.
Bandwidth Control Input Rate Limit
28