PLANET SGSD-1022 - Manual (Page 255)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
4.10.3.3 Service Policy
Attaching a Policy Map to Ingress Queues
This function binds a policy map to the ingress queue of a particular interface.
Command Usage
• You must first define a class map, then define a policy map, and finally bind the service policy to the required interface.
• You can only bind one policy map to an interface.
• The current firmware does not allow you to bind a policy map to an egress queue.
1. Click QoS, DiffServ, Service Policy Settings.
2. Check Enabled and choose a Policy Map for a port from the scroll-down box, then click Apply.
Figure 4-10-25 Service Policy Settings page screenshot
The page includes the following fields:
Object Description
Ports Specifies a port.
Ingress Applies the rule to ingress traffic.
Enabled Check this to enable a policy map on the specified port.
Policy Map Select the appropriate policy map from the scroll-down box.
255