Show network-access – PLANET SGSD-1022 User Manual
Page 483
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Default Setting
None
Command Mode
Privileged Exec
Example
Console#clear network-access mac-address-table interface ethernet 1/1
Console#
show network-access
Use this command to display the MAC authentication settings for port interfaces.
Syntax
show network-access [interface interface]
interface - Specifies a port interface.
ethernet unit/port
-unit - This is unit 1.
-port - Port number. (Range: 1-26)
Default Setting
Displays the settings for all interfaces.
Command Mode
Privileged Exec
Client Security Commands
Example
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time: 1800
Port : 1/1
MAC Authentication: Disabled
MAC Authentication Intrusion action: Block traffic
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts : 2048
Dynamic VLAN Assignment: Enabled
483