PLANET SGSD-1022 - Manual (Page 458)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
exec-timeout
show ip ssh
ip ssh authentication-retries
This command configures the number of times the SSH server attempts to reauthenticate a user. Use the no form to restore the
default setting.
Syntax
ip ssh authentication-retries count no ip ssh authentication-retries count – The number of authentication attempts
permitted after which the interface is reset. (Range: 1-5)
Default Setting
3
Command Mode
Global Configuration
Example
Console(config)#ip ssh authentication-retires 2
Console(config)#
Related Commands
show ip ssh
ip ssh server-key size
This command sets the SSH server key size. Use the no form to restore the default setting.
Syntax
ip ssh server-key size key-size no ip ssh server-key size
key-size – The size of server key. (Range: 512-896 bits)
Default Setting
768 bits
Command Mode
Global Configuration
Command Usage
The server key is a private key that is never shared outside the switch.
The host key is shared with the SSH client, and is fixed at 1024 bits.
458